AC 2 Prong Power Cord 5ft
4.7Editor score
Figure-eight C7 connector
Five-foot cable length
18 AWG copper wiring
Thickened PVC construction
In this guide
A replacement PS4 power adapter cable must match both the console or power brick and the shape of its power inlet. Figure-eight C7 cords suit many PS4 Slim setups, while C17 cords serve some PS4 Pro models, and a few products target specialized VR or connector needs.
We compared the ten options using supplied compatibility information, connector types, wire gauges, current ratings, cable lengths, certification claims, package contents, and customer ratings. The guide distinguishes straightforward console cords from PSVR power adapters and components designed for a narrower model range.
Each review explains the practical fit, strongest benefits, and important limitations of the cable. Our top selections reflect versatility, certification, construction, and useful length, while readers should confirm their console model and current pricing before purchasing.
Top 3 Picks for Best PS4 Replacement Power Adapter Cable
TPLTECH AC Power Cord
4.8Editor score
UL-listed construction
Broad console compatibility
18 AWG copper wire
125V seven-amp rating
12V 3A AC Adapter for PSVR
4.8Editor score
Stable 36-watt output
Universal input voltage
Over-voltage and short protection
Multiple Sony device references
Top 10 Best PS4 Replacement Power Adapter Cable in 2026 Compared
The table below compares every cable by its intended device, connector format, electrical rating, and length. Because PS4 models do not all use the same inlet, the most important distinction is whether the product supplies a wall cord, powers a specific brick, or replaces a specialized external adapter.
ProductsSpecificationsEditor scorePrice
Best Budget
Superer 4ft Figure-8 Cord
IEC C7 figure-eight
NEMA 1-15P wall plug
18 AWG, 125V, 7A
Four-foot cable
4.7Editor score
Editor's Choice
Five-Foot 2-Prong Cord
IEC C7 figure-eight
NEMA 1-15P wall plug
18 AWG, 125V rating
Five-foot cable
4.7Editor score
Best Premium
PS4 Pro C17 Cord
IEC C17 figure-eight
NEMA 1-15P wall plug
18 AWG, 125V, 10A
Six-foot cable
4.7Editor score
Mustpoint 4-Pin Connector
Four-pin PS4 connector
CUH-1115A compatibility
ADP-240CR brick support
65mm connector specification
3.8Editor score
TPLTECH Universal C7 Cord
IEC C7 figure-eight
NEMA 1-15P wall plug
18 AWG, 125V, 7A
UL-listed power cord
4.8Editor score
PSVR 12V 3A Adapter
12V DC, 3A output
36W rated power
100–240V AC input
50/60Hz input frequency
4.8Editor score
Two-Pack Figure-8 Cords
IEC C7 figure-eight
NEMA 1-15P wall plug
18 AWG reinforced wiring
Two five-foot cords
4.8Editor score
Six-Foot Universal C7 Cord
IEC C7 figure-eight
NEMA 1-15P wall plug
18 AWG, 125V, 7A
Six-foot cable
4.9Editor score
Superer Six-Foot C7 Cord
IEC C7 figure-eight
NEMA 1-15P wall plug
18 AWG, 125V, 7A
Six-foot cable
4.7Editor score
Four-Foot PS4 Pro C17 Cord
IEC C17 figure-eight
NEMA 1-15P wall plug
18 AWG, 125V, 10A
Four-foot cable
4.7Editor score
1. Superer 4ft Figure-8 Cord – Broad Compatibility for Standard Console Inlets
Superer 4ft Figure-8 Cord
ETL-certified figure-eight cord
18 AWG copper wiring
125V, seven-amp rating
Four-foot length
This Superer cable is a general-purpose replacement for consoles and household electronics using a standard two-slot figure-eight inlet. It carries a 4.7 customer rating and stands out for its ETL certification, copper core, and unusually clear list of supported and excluded devices. The cord is rated for 125V AC, up to 7A, and uses 18 AWG conductors.
Pros
- Works across many console families
- ETL-certified construction
- Pure copper core
- Clear compatibility exclusions
Cons
- Excludes PS4 Pro models
- Four-foot length may be short
We may earn a commission when you buy through this link, at no additional cost to you.
Compatibility is broad within the standard C7 format. The supplied information lists PS5, PS5 Slim, PS4, PS4 Slim, PS3 Slim, and PS3 Super Slim, along with Xbox Original, Xbox One S, Xbox One X, Xbox Series S, and Xbox Series X. It can also serve matching televisions, printers, speakers, and monitors, making it a practical choice for an entertainment area with several two-prong devices.
The clearest limitation is model-specific exclusion. This cord does not fit Sony PS1, PS2, original fat PS3, or PS4 Pro systems, nor the original fat Xbox One and several Xbox 360 models. Its four-foot length may also be less convenient behind a large entertainment center, although the compact run can be useful near an outlet mounted higher on the wall.
This is a solid all-around choice for a PS4 owner whose console has a two-slot inlet and who values a recognized certification. Buy it when the original cable has been lost or damaged, especially if the same household also contains compatible Xbox, TV, printer, or speaker equipment. Confirm the console inlet and available cable route before ordering.
A Versatile Multi-Device Cord
Its value extends beyond PlayStation because the same C7 connector appears across several console and household-device categories. Buyers can compare the listed model names directly rather than relying on an ambiguous universal-cord description.
Certification and Conductor Details
The ETL listing and specified pure copper core provide useful purchase criteria beyond appearance. The stated 18 AWG gauge and 7A maximum also make the electrical specification easier to compare with the alternatives in this guide.
We may earn a commission when you buy through this link, at no additional cost to you.
2. AC 2 Prong Power Cord 5ft – Practical Five-Foot Replacement
AC 2 Prong Power Cord 5ft
Five-foot C7 power cord
18 AWG copper conductors
Thickened PVC jacket
1000-plus bend testing
This five-foot AC cord is a straightforward replacement option for PS4 Slim and other consoles or devices that use the standard two-slot figure-eight connection. Its 4.7 rating, five-foot length, and 18 AWG copper construction make it an appealing general option, especially for setups where a short cord would not reach the wall outlet.
Pros
- Five-foot length suits many setups
- Wide console compatibility
- Thickened PVC construction
- Copper core wiring
Cons
- No formal certification stated
- Original fat PS3 excluded
We may earn a commission when you buy through this link, at no additional cost to you.
The compatibility list includes PS4 Slim, PS5, PS5 Slim, PS3 Slim, PS3 Super Slim, Xbox One S, Xbox One X, Xbox Series S, and Xbox Series X. The product also works with LED LCD televisions, monitors, sound bars, printers, and other equipment requiring a two-slot power cord. Original fat PS3 consoles are explicitly excluded.
Its construction claims emphasize thickened PVC, a copper core, tensile resistance, and passage through more than 1,000 bending tests. Those details suggest attention to routine flexing, though the supplied listing does not mention UL or ETL certification. That makes certification unavailable as a deciding factor for shoppers who prioritize independently documented testing.
Choose this cord when you need a replacement for a compatible PS4 Slim, want enough slack for a moderate-distance outlet, and prefer a single conductor cord with broad household utility. It is less suitable for a PS4 Pro setup, original fat PS3, or any situation in which a recognized safety listing is essential to your decision.
Useful Length for Everyday Arrangements
A five-foot cable offers more placement flexibility than a compact four-foot lead without requiring the reach of a six-foot option. It can run behind a smaller stand or connect a console positioned somewhat farther from the outlet.
Flexing-Focused Construction Claims
The stated bend-test figure and thickened PVC jacket address a common failure point in replacement cords: repeated flexing near the plug. Those claims are useful for comparison, although buyers should still inspect the cord for damage.
We may earn a commission when you buy through this link, at no additional cost to you.
3. PS4 Pro C17 Cord – Six-Foot UL-Listed Option for Brick-Powered Models
PS4 Pro C17 Cord
IEC C17 two-slot connector
UL-listed power cord
18 AWG, 125V, 10A
Six-foot cable
This cable is intended for PS4 Pro configurations that use a C17 figure-eight connection to a power brick. It has a 4.7 rating, a six-foot length, and a stated UL listing, making it a specialized but well-documented choice for compatible PS4 Pro owners and several Xbox 360 systems.
Pros
- Targets older PS4 Pro models
- UL-listed construction
- Six-foot routing flexibility
- Ten-amp electrical rating
Cons
- Not compatible with CUH-7200
- Intended for brick-powered systems
We may earn a commission when you buy through this link, at no additional cost to you.
The listed PS4 Pro compatibility covers the older CUH-7015 and CUH-7115 models. It is also compatible with the power supply brick used by the original Xbox One and Xbox 360 E, Elite, Slim, and Arcade models. The connector is an IEC 320 C17, while the wall-side plug is a NEMA 1-15P.
Its 18 AWG conductors are rated for 125V and up to 10A, giving it a higher stated maximum current than the seven-amp C7 products elsewhere in the guide. The six-foot length provides practical routing flexibility around furniture. The major exclusion is the PS4 Pro CUH-7200 series, so checking the console model is not optional.
This is the better match than a standard C7 cable when your older PS4 Pro has a detachable power brick and accepts the C17 end. It also suits compatible Xbox 360 brick setups. Avoid it if your console uses a two-slot C7 inlet, if you own a CUH-7200 PS4 Pro, or if you need a cable that directly plugs into a standard PS4 Slim.
The Correct Connector Matters
C7 and C17 cords can look similar but are not interchangeable. This cable's IEC 320 C17 specification identifies the intended equipment and helps prevent a mismatch with the much more common two-slot C7 inlet.
Room for Flexible Routing
The six-foot lead offers useful reach from outlets behind entertainment furniture. It can reduce the need for an extension arrangement when the console brick sits farther from the wall receptacle.
We may earn a commission when you buy through this link, at no additional cost to you.
4. Mustpoint 4-Pin Connector – Narrow Match for One PS4 Brick Setup
Mustpoint 4-Pin Connector
Four-pin PS4 connector
CUH-1115A model support
ADP-240CR brick support
65mm connector specification
This product is not a conventional wall-to-console cord. It is a four-pin power supply connector for the Sony PS4 CUH-1115A when used with an ADP-240CR power supply brick, and the supplied 65mm measurement helps narrow down the correct component. Its 3.8 rating is the lowest among these selections.
Pros
- Targets one defined PS4 setup
- Includes matching brick reference
- Compact specialized replacement
- Brand-new component supplied
Cons
- Narrow model compatibility
- Lowest rating in this guide
- No length specification
We may earn a commission when you buy through this link, at no additional cost to you.
The advantage is specificity. Rather than relying on a broad figure-eight description, the product names the PS4 model and brick reference that it is intended to support. It may be useful for a repair where the original four-pin connection has failed but the existing power brick and console remain compatible.
Its limitations are equally important. The listing says it is only for Sony PlayStation 4, does not establish compatibility with other PS4 model numbers, and provides no cable-length information. There is also no stated UL or ETL certification, electrical rating, or conductor gauge in the supplied product details.
This connector is best considered only after confirming the CUH-1115A and ADP-240CR identifiers on the user's console and power brick. It is not a general replacement for a PS4 Slim power cord, a PS4 Pro wall cable, or a PSVR adapter. Buyers outside that exact configuration should choose one of the broader C7 or C17 options.
A Repair-Oriented Component
This product fills a narrow gap where a full wall cord is unnecessary and the four-pin console-to-brick connection needs replacement. Its value depends on identifying the correct hardware rather than matching a general console generation.
Model Verification Comes First
The CUH-1115A and ADP-240CR references are the most important buying details. If those identifiers do not appear on the equipment, a differently shaped connector may be required, even when the item is also described as a PS4 accessory.
We may earn a commission when you buy through this link, at no additional cost to you.
5. TPLTECH AC Power Cord – Best Overall Multi-Device Replacement
TPLTECH AC Power Cord
UL-listed two-prong cord
IEC C7 figure-eight
18 AWG copper conductors
125V seven-amp rating
The TPLTECH cord is the most balanced conventional replacement in this guide. It combines a 4.8 customer rating with a UL listing, broad console compatibility, pure copper wiring, and a clearly specified 18 AWG, 125V, 7A configuration. It is a strong choice for users who want one dependable cord for multiple supported devices.
Pros
- Highest-rated standard cord
- UL-listed electrical construction
- Very broad device compatibility
- Pure copper wiring
Cons
- No length stated in listing
- Not suitable for every PS4
We may earn a commission when you buy through this link, at no additional cost to you.
Its compatibility covers PS5, PS5 Slim, PS5 Pro, PS4, PS4 Slim, PS3 Slim, and PS3 Super Slim. It also lists Xbox Series S, Xbox Series X, Xbox One S, and Xbox One X. The same two-prong figure-eight format can serve compatible TVs, printers, speakers, and other devices, extending its usefulness across an entertainment setup.
The construction information is reassuring: heavy-duty flame-retardant cable jacket, pure copper wire, and resistance to bending and daily wear. A UL listing gives shoppers another objective selection criterion beyond compatibility. The main omission is a stated cable length, which matters when judging reach around furniture or wall placement.
This is our Editor's Choice because it balances certification, rating, conductor quality, and flexibility without narrowing the product to a single console family. It is an excellent match for a PS4 with a C7 inlet, especially when the same cable may also serve a compatible Xbox, television, or printer. Confirm the connector and model list before ordering.
One Cord, Multiple Compatible Systems
The broad model support reduces the need to maintain separate wall cords for different entertainment components. It also makes this listing particularly useful for households transitioning between PS4, PS5, and supported Xbox hardware.
UL Listing Adds Confidence
The UL certification is a meaningful advantage for a component connected directly to household power. It gives the product a documented safety credential that can be evaluated alongside the wire gauge and current rating.
We may earn a commission when you buy through this link, at no additional cost to you.
6. PSVR 12V 3A Adapter – Specialized Power for PlayStation VR
PSVR 12V 3A Adapter
DC 12V, 3A output
36W maximum output
100–240V AC input
Over-current protection
This is a specialized AC adapter for Sony PlayStation VR equipment rather than a universal PS4 wall cord. Its 4.8 rating and detailed output specification make it the strongest choice in the guide for PSVR owners who need to replace a compatible 12V 3A power adapter or keep a spare on hand.
Pros
- Purpose-built PSVR replacement
- Wide-range AC input
- Specified 36-watt output
- Built-in electrical protection
Cons
- Not a standard PS4 cord
- Intended for 12V 3A devices
We may earn a commission when you buy through this link, at no additional cost to you.
The adapter accepts 100–240V AC at 50/60Hz and supplies DC 12V at 3A, for 36 watts of output. It references CUH-ZAC1, ADP-36NH A, CUH-ZVR2, CUH-ZVR1, and SQN36W12P-04, and also covers Sony wireless headphones and 4K Blu-ray players that require the same 12V 3A output.
Built-in protection against over-voltage, over-current, and short circuits is a notable feature for a replacement power supply. The stated output is designed to provide stable power during extended VR sessions or movie playback. Unlike the figure-eight cords in this list, this product is an active power adapter with a defined DC output.
Buy it when the failed component is a Sony PlayStation VR processor unit or another device explicitly requiring 12V and 3A. Do not assume it will replace a PS4 Slim cord, a PS4 Pro power brick lead, or the console's internal power supply. Verify the original adapter label and device requirements before purchasing.
Purpose-Built for Virtual Reality
PSVR systems use specific external power requirements, so a purpose-built adapter with a 36-watt output is more relevant than a generic two-prong cord. The listed Sony adapter references help users match a replacement to established hardware identifiers.
Protection for Long Sessions
Over-voltage, over-current, and short-circuit protection are particularly useful when an adapter remains connected for extended periods. Stable output supports the uninterrupted use expected during gaming and virtual-reality media sessions.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Two-Pack Figure-8 Cords – Convenient Backup Pair for Compatible Devices
Two-Pack Figure-8 Cords
Two five-foot C7 cords
Non-polarized two-prong plugs
18 AWG reinforced materials
Multi-device compatibility
This two-pack is designed for shoppers who want a primary cord and a matching spare. Both included leads are five-foot, non-polarized figure-eight power cords for compatible PlayStation and Xbox models. The 4.8 rating reflects a well-received product with practical package value and broad standard-inlet support.
Pros
- Includes two matching cords
- Useful spare included
- Five-foot routing length
- Broad standard-inlet compatibility
Cons
- Original Xbox One excluded
- Both cords share one design
We may earn a commission when you buy through this link, at no additional cost to you.
The compatibility description includes PS5, PS4 Slim, PS3 Slim, Xbox Series S, Xbox Series X, Xbox One S, and Xbox One X. The cords also work with LED LCD televisions, monitors, sound bars, and printers that require a two-slot inlet. Original fat PS3 and original Xbox One systems are explicitly excluded.
Each cable uses 18 AWG materials and is described as reinforced for repeated bending and stable delivery. The package contains two five-foot cords, allowing one to remain with a gaming console while the other serves a television, sound bar, or stored backup location. It is therefore more versatile than a pair intended for two identical consoles.
This package makes sense for a multi-device entertainment area or for anyone who wants a spare ready before a cable fails. It is less suitable if you need C17 connectivity for a PS4 Pro power brick, need an original Xbox One brick lead, or prefer to purchase only one cord for occasional use.
A Practical Spare Strategy
Keeping a second matching cord prevents the inconvenience of searching for a replacement after damage is discovered. It also makes the package useful when two supported devices in the same room require similar connections.
Two Uses Beyond the Console
The second cord can serve a television, monitor, sound bar, or printer with the same figure-eight inlet. This expands the package's usefulness beyond simply having an identical duplicate.
We may earn a commission when you buy through this link, at no additional cost to you.
8. Six-Foot Universal C7 Cord – Extended Reach with Certified Construction
Six-Foot Universal C7 Cord
Six-foot C7 power cord
UL-certified construction
18 AWG copper wiring
125V seven-amp rating
This six-foot C7 power cord combines the highest customer rating in the guide with a UL certification and detailed electrical specifications. It is a particularly useful option when a PS4 setup needs more distance between the console and wall outlet or when the same cord must serve numerous compatible household devices.
Pros
- Highest customer rating
- Six-foot reach
- UL-certified construction
- Extensive device compatibility
Cons
- Broad wording needs verification
- Longer than standard OEM leads
We may earn a commission when you buy through this link, at no additional cost to you.
The listing names PS5, PS5 Slim, PS5 Pro, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, Xbox Series S, Xbox Series X, Xbox One S, and Xbox One X. It also references Canon, Epson, HP Officejet, Frigidaire, and Insignia devices, plus televisions, mini fridges, printers, projectors, monitors, and audio equipment using the standard two-slot non-polarized inlet.
Its conductor specification is 18 AWG copper, rated for 125V, 50–60Hz, and up to 7A. The six-foot length reaches 183 centimeters, offering more routing flexibility than typical three- or four-foot OEM cords. It plugs directly into a standard US outlet and requires no transformer for devices using US voltage.
This cord is a strong pick for a PS4 Slim or another C7-equipped system located behind furniture. Its 4.9 rating, certification, length, and broad compatibility make it especially attractive. Even so, buyers should verify the connector on the device and confirm that the specific household product is covered by the stated requirements.
Reach Behind Entertainment Furniture
The six-foot lead solves common placement problems when an outlet is high on the wall or farther behind a console stand. It provides practical slack without moving the console away from its intended location.
A Detailed Electrical Specification
The stated copper construction, 18 AWG gauge, 125V rating, 7A capacity, and UL certification provide a clear technical basis for comparison. Those details also make it easier to distinguish this cord from loosely described universal alternatives.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Superer Six-Foot C7 Cord – Long Cord for Consoles and Televisions
Superer Six-Foot C7 Cord
Six-foot C7 power cord
ETL-certified construction
18 AWG copper conductors
125V seven-amp rating
This six-foot Superer cable is a replacement for two-slot C7 devices, with particular emphasis on PlayStation consoles and television use. Its 4.7 rating, ETL certification, and stated copper-core construction fit the needs of a buyer who wants a standard cord with extra reach.
Pros
- Six-foot cable length
- ETL-certified construction
- Television compatibility
- Pure copper core
Cons
- PS4 Pro excluded
- Includes several model exclusions
We may earn a commission when you buy through this link, at no additional cost to you.
For Sony hardware, compatibility includes PS5, PS5 Slim, PS4, PS4 Slim, PS3 Slim, and PS3 Super Slim. It also supports Xbox Original, Xbox One S, Xbox One X, Xbox Series S, and Xbox Series X. Television coverage is extensive, including Samsung, LG, Hisense, TCL, Sony, Apple, Insignia, Sharp, Panasonic, Toshiba, JVC, and Roku smart LED, LCD, and HD sets with a matching port.
The cable is specified as an 18 AWG non-polarized figure-eight cord rated for 125V AC and 7A maximum, with a six-foot length and ETL certification. It also carries a 24-month manufacturer warranty. The clear exclusion list covers PS1, PS2, original fat PS3, PS4 Pro, original fat Xbox One, and several Xbox 360 configurations.
Choose this product for a compatible PS4, particularly when a longer lead is useful for a wall-mounted television or a console placed farther from the outlet. It is not the right cord for a PS4 Pro power brick or other systems requiring C17. As always, verify the inlet shape and the device maker's requirements before purchase.
Built Around Common Two-Slot Devices
The product combines console and television compatibility in one standard C7 format. That makes it useful for entertainment centers where a television, game console, and other devices may share nearby outlets.
A Six-Foot Entertainment-Center Lead
The longer run is particularly helpful when the receptacle sits behind a large television cabinet. It provides more installation flexibility than shorter replacement leads without changing the device's power brick.
We may earn a commission when you buy through this link, at no additional cost to you.
10. Four-Foot PS4 Pro C17 Cord – Compact UL-Listed Brick Cable
Four-Foot PS4 Pro C17 Cord
IEC C17 two-slot connector
UL-listed power cord
18 AWG, 125V, 10A
Four-foot cable
This four-foot cord is a compact UL-listed option for older PS4 Pro models and compatible Xbox systems that connect through a C17 cord and an external power brick. It has a 4.7 rating and a straightforward specification, making it a practical alternative to the longer version of the same connector type.
Pros
- UL-listed construction
- Supports older PS4 Pro models
- Ten-amp stated rating
- Compatible Xbox brick options
Cons
- Not compatible with CUH-7200
- Shorter routing distance
We may earn a commission when you buy through this link, at no additional cost to you.
The listed PlayStation compatibility includes PS4 Pro CUH-7015 and CUH-7115. It also supports the power supply brick of the original Xbox One, Xbox 360 E, Xbox 360 Elite, Xbox 360 Slim, and Xbox 360 Arcade. The electrical specification is 18 AWG, 125V, up to 10A, using an IEC 320 C17 connector and NEMA 1-15P wall plug.
Its compact four-foot length is useful when the console and outlet are close together or when excess cable would make storage inconvenient. The UL listing offers a documented safety credential. The most consequential restriction is the exclusion of PS4 Pro CUH-7200 systems, whose connector configuration differs.
This cord is a good fit for an older compatible PS4 Pro whose original wall lead has failed. It can also service the named Xbox brick arrangements. It is not a replacement for a standard PS4 Slim C7 cord, and owners should verify the console model and the shape of the power-brick inlet before ordering.
A Shorter Alternative for Brick Systems
When the power brick sits close to the receptacle, four feet can be easier to manage than a longer cord. The shorter lead reduces excess cable while preserving the required C17 connection.
Model-Specific Fit Remains Essential
The CUH-7015 and CUH-7115 identifiers define the intended PlayStation coverage. Because the CUH-7200 series is excluded, shoppers should read the model markings rather than relying on the broader PS4 Pro label.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best PS4 Replacement Power Adapter Cable
The most important choice is physical compatibility, followed by electrical specifications and installation needs. Identify the exact PS4 model, inspect the existing power inlet, and decide whether you need a wall cord, a brick connector, or a specialized PSVR adapter.
Identify the Console Model
PS4 hardware includes standard PS4, PS4 Slim, and PS4 Pro variants, and their power connections are not interchangeable. A C7 cord fits many standard and Slim configurations, while a C17 cord is intended for certain PS4 Pro power-brick arrangements. The CUH-7015 and CUH-7115 models are specifically listed for the two C17 products in this guide, while CUH-7200 models are excluded. Find the model number on the console's underside or rear label and compare it with the listing before buying.
Match the Connector Shape
Connector type determines whether the cord can physically and safely connect. IEC C7 is the common two-slot figure-eight inlet used by many PS4 Slim, PS5, and Xbox systems. IEC C17 has a different profile and fits specific brick-powered equipment, including the older PS4 Pro models identified here. The Mustpoint option uses a four-pin connector for the CUH-1115A and ADP-240CR arrangement, while the PSVR product is a full 12V 3A power adapter. Never assume that a visually similar figure-eight cord is interchangeable.
Check Electrical Ratings
Look for conductor gauge, input or output voltage, current capacity, and frequency where applicable. The C7 cords in this guide use 18 AWG wire and are generally rated for 125V and 7A. The C17 cables list 18 AWG, 125V, and 10A. The PSVR adapter accepts 100–240V AC at 50/60Hz and produces DC 12V at 3A, or 36W. These ratings should correspond with the original adapter or power supply rather than being chosen solely on connector appearance.
Review Safety Certification
A recognized listing provides an independent indication that a cable or adapter was evaluated for relevant safety requirements. ETL certification appears on the Superer cords and the six-foot universal cord, while UL listing appears on the TPLTECH cord, the six-foot universal cord, and both C17 options. The five-foot budget cord does not state a formal certification in its supplied information. Certification should complement, rather than replace, checking the connector and electrical specification.
Select the Needed Length
Length affects placement more than electrical performance. Four-foot cords suit close wall connections, five-foot leads provide a moderate amount of routing flexibility, and six-foot cords are easier to route behind large entertainment furniture. The six-foot TPLTECH cord does not have a stated length in its supplied details, so buyers should check the product images. Avoid choosing an extremely long cord when a short one can reach without a tight bend or awkward loop.
Consider Multi-Device Use
A standard C7 cord can be useful beyond the console because many televisions, monitors, sound bars, printers, speakers, and other electronics use the same inlet. Broadly compatible products can serve an entire entertainment center, while the two-pack provides a ready spare. This flexibility is valuable if you regularly move equipment or want one cord type for several devices. Always verify that the non-console product uses the same connector and electrical requirements.
Inspect Cable Construction
The listed construction features include copper cores, 18 AWG conductors, thickened PVC, flame-retardant jackets, and reinforced bends. These attributes can help resist everyday flexing near plugs and connectors. Pay attention to the product's certification and specifications rather than relying only on words such as durable. When the replacement arrives, inspect it for pinched insulation, damaged ends, loose prongs, or other visible defects before connecting it.
Decide Between Cord and Adapter
Most console replacements are simple wall cords, but specialized equipment requires a full adapter. The PSVR product converts household AC into regulated DC and is designed for processor units and other compatible 12V 3A devices. The four-pin Mustpoint item is only a connector rather than a complete wall-to-console cable. Reading the product category carefully prevents buyers from purchasing a component that cannot provide the required power connection on its own.
How to Use and Care for Your PS4 Replacement Power Adapter Cable
Before installation, turn off the PS4, disconnect the existing power cord from the wall and console or power brick, and confirm that the replacement's connector shape and electrical specifications match. Inspect both the cable and the equipment inlet for dirt, bent prongs, cracks, or heat damage. If the original cord failed because of visible damage, also inspect the power brick and wall outlet before connecting a replacement.
Route the cable without creating sharp bends, pinching it behind furniture, or placing it where a pet could chew it. For a console with an internal figure-eight inlet, connect the C7 end firmly and keep stress away from the socket. For a brick-powered system, connect the correct C17 or four-pin end to the brick and the NEMA plug to the wall. Do not force a connector that does not fit easily.
After connecting the cable, power on the console and confirm normal operation before leaving the setup unattended. Replace the cable immediately if the connector becomes unusually hot, discoloration appears, the plug shifts, or power becomes intermittent. Store spare cords loosely in a dry place and avoid wrapping them tightly around the plug, which can stress the conductors where the cable is most frequently flexed.
Frequently Asked Questions
What type of power cord does a standard PS4 use?
Many standard PS4 and PS4 Slim systems use a two-slot figure-eight IEC C7 connection, but compatibility should always be confirmed from the model label and the existing power inlet. Some PS4 Pro configurations use a C17 cord connected to an external power brick. A four-pin connector and a 12V PSVR adapter serve different products and are not general substitutes.
Can I use a C7 power cord from another console on my PS4?
You can use a C7 cord only if the connector, voltage, current rating, and polarity arrangement match the PS4 equipment and its power supply. Several products in this guide also support compatible Xbox, television, printer, and speaker connections. A visually similar plug is not sufficient evidence of compatibility, so check the technical descriptions before use.
Does the PS4 Pro use the same cord as the PS4 Slim?
Not in every configuration. The C7 products are not listed for PS4 Pro, while the C17 cords support older CUH-7015 and CUH-7115 PS4 Pro models and exclude the CUH-7200 series. Check both the console model and the inlet on the original power brick, as the label alone does not reveal every connector difference.
Is a UL-listed replacement cord safer than an uncertified cord?
A recognized UL or ETL listing provides useful evidence of independent safety evaluation, although certification does not guarantee compatibility or eliminate normal care requirements. Compare the connector, conductor gauge, current rating, and voltage first. Certification then serves as an additional confidence factor when multiple otherwise suitable cables are available.
How long should a PS4 replacement power cord be?
Choose the shortest cord that reaches the outlet without tension, pulling, or a tight bend. Four feet works for close placements, five feet offers moderate flexibility, and six feet can be useful behind large entertainment cabinets. Avoid a cable so short that it forces the console brick or plug into an uncomfortable position.
Can I use a PSVR power adapter for my PS4 console?
No, unless the console itself is expressly designed to use that adapter's output, which the supplied product information does not establish. The 12V 3A PSVR adapter is intended for compatible PlayStation VR processor units and specified other Sony devices. A PS4 console requires its own correctly rated console cord or power-brick arrangement.
What does a two-prong figure-eight connector look like?
It has a small rounded or figure-eight-shaped device end with two slots, while the wall end is a two-prong NEMA plug. The device-end profile must match the recess on the console or power brick. Because C7, C17, and proprietary four-pin connectors can appear similar, compare dimensions and the product specification rather than relying on shape alone.
What should I do if a replacement cord does not fit?
Stop and verify the console model, existing connector type, and power-brick configuration. Do not force the plug or alter the connector, since this can damage the console and create an unsafe connection. The model-specific details on the console and brick will indicate whether you need a C7, C17, four-pin, or specialized PSVR power solution.
Final Thoughts on Choosing the Best PS4 Replacement Power Adapter Cable
The TPLTECH AC Power Cord is the strongest overall conventional choice because it combines a high customer rating, UL listing, copper construction, and broad compatibility across supported PlayStation, Xbox, and household devices. The five-foot AC 2 Prong Power Cord 5ft is a compelling budget-oriented alternative for compatible C7 systems that need moderate reach.
Prioritize exact connector and model compatibility before considering length or broader device support. PS4 Slim owners commonly need a C7 figure-eight cord, older PS4 Pro configurations may need C17, the CUH-1115A setup calls for its specified four-pin connector, and PSVR equipment requires the correct 12V 3A adapter. Certification, wire gauge, and electrical ratings should then narrow the final choice.
Review the current product listing, connector images, model exclusions, and current pricing immediately before purchasing. Listings and availability can change, and the correct model number remains the final authority on whether a replacement cable or adapter will work correctly with your PS4 setup.